Recent posts

#21

Software technical support / Not able to upload .hex file.

Last post by THEmatt - April 09, 2020, 03:24:01 PM

"/private/var/folders/12/0qxznztd1fnbl2589qk88vsr0000gn/T/AppTranslocation/14B4974E-5763-48AE-A545-C64CD5C1E087/d/EasyUploader.app/Contents/MacOS//avrdude" -c arduino -p m328p -C "/private/var/folders/12/0qxznztd1fnbl2589qk88vsr0000gn/T/AppTranslocation/14B4974E-5763-48AE-A545-C64CD5C1E087/d/EasyUploader.app/Contents/MacOS/avrdude.conf" -P /dev/cu.usbserial-AM00LQUF -U flash:w:"/Users/matthewchenet/Downloads/AtcyclotronV1-1.hex":i


here is my console information from easy uploader. I don't think i've had many problems uploading the FTDI installer, or the easy uploader software. The atmegatron page on the main site said it would take 20-30 seconds and it takes longer than that yet nothing happens. Please help

#22

Atmegatron/Odytron Hardware technical support / Re: Atemgatron (Odytron Ed) no...

Last post by gr33n - April 06, 2020, 10:02:27 PM

Doh, sorry!! That got it all sorted. Thanks a lot for your help, Paul.

#23

Everything else / Re: Post your songs!

Last post by paulsoulsby - March 08, 2020, 11:14:35 PM

really nice!

#24

Everything else / Re: Post your songs!

Last post by ToyKeeper - February 13, 2020, 06:03:56 AM

Here's a silly little sequence i did with the oscitron and an arturia microbrute. also featuring Boss DR-202 and my Korg prologue 

https://soundcloud.com/antron420/the-north-02

That's a really relaxing tune to listen to on repeat.  It's simple, but has a good ebb and flow which makes it nice in the background without making the ears tired.

#25

Everything else / Re: Post your songs!

Last post by Antron4.2.0 - February 13, 2020, 04:55:14 AM

Here's a silly little sequence i did with the oscitron and an arturia microbrute. also featuring Boss DR-202 and my Korg prologue 

https://soundcloud.com/antron420/the-north-02

#26

Atmegatron / cannot load software on new ma...

Last post by rui-gen - February 06, 2020, 07:28:25 PM

I have a limited edition Pete Fowler atmegatron
I got the lead with the machine
I cannot load software onto the machine - I have in the past on an older mac but I have now upgraded my MAC and it will not work
The black wire on the PIN is too the left
The switch is also in correct position
I have installed the correct driver and the newest version on easy uploader
Im pulling my hair out!
My MAC is running MAC OS Catalina 10.15.3
please help!

#27

Atmegatron/Odytron Hardware technical support / Re: Atemgatron (Odytron Ed) no...

Last post by paulsoulsby - January 06, 2020, 10:00:49 PM

Hi - I think you haven't installed the FTDI cable. You need to download and install the drivers.  Then select it in the dropdown box in Easy Uploader. You've currently got the Mac's Bluetooth port selected.

#28

Atmegatron/Odytron Hardware technical support / Re: Atemgatron (Odytron Ed) no...

Last post by gr33n - December 06, 2019, 06:01:52 PM

Many thanks for getting back to me. Unfortunately, it isn't powering up at so I haven't been able to upload anything so I'm not sure where to go from here:

"/Applications/EasyUploader.app/Contents/MacOS//avrdude" -c arduino -p m328p -C "/Applications/EasyUploader.app/Contents/MacOS/avrdude.conf" -P /dev/cu.Bluetooth-Incoming-Port -U flash:w:"/Volumes/HD 2 Music/x Atmegatron/AtmegatronV2-5.hex":i
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00

avrdude done.  Thank you.

#29

Atmegatron/Odytron Hardware technical support / Re: Atemgatron (Odytron Ed) no...

Last post by paulsoulsby - December 06, 2019, 10:44:34 AM

Hi - the Odytron Patches should be a .eep file, not .hex, so you shouldn't have been able to load this as firmware (it'll only upload .hex files, not .eep)

What happens if you upload a different firmware?  Does the software upload OK and all is back to normal? If it doesn't upload, click the "show console" box in Easy Uploader and copy and paste the text here, so I can see what happens.  thanks

#30

Atmegatron/Odytron Hardware technical support / Atemgatron (Odytron Ed) not po...

Last post by gr33n - December 02, 2019, 02:16:31 PM

I have the Atmegatron Odytron SE that suddenly won't power up. I was uploading some different software and then it seemed to lose power/lights out.

I had successfully re-installed the Odytron v1.3 software. I think I have accidentally uploaded the Odytron patches (Ody Factory.eep.hex) as software rather than via the 'load patches' option(!) - could this have messed things up?

I haven't had any problems before and am using the supplied cable, etc. but it's been a while since I uploaded different software so am worried that I might have not followed the proper procedure. Any ideas would be gratefully received! Thank you.