Messages

Doh, sorry!! That got it all sorted. Thanks a lot for your help, Paul.

Many thanks for getting back to me. Unfortunately, it isn't powering up at so I haven't been able to upload anything so I'm not sure where to go from here:

"/Applications/EasyUploader.app/Contents/MacOS//avrdude" -c arduino -p m328p -C "/Applications/EasyUploader.app/Contents/MacOS/avrdude.conf" -P /dev/cu.Bluetooth-Incoming-Port -U flash:w:"/Volumes/HD 2 Music/x Atmegatron/AtmegatronV2-5.hex":i
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00

avrdude done.  Thank you.

I have the Atmegatron Odytron SE that suddenly won't power up. I was uploading some different software and then it seemed to lose power/lights out.

I had successfully re-installed the Odytron v1.3 software. I think I have accidentally uploaded the Odytron patches (Ody Factory.eep.hex) as software rather than via the 'load patches' option(!) - could this have messed things up?

I haven't had any problems before and am using the supplied cable, etc. but it's been a while since I uploaded different software so am worried that I might have not followed the proper procedure. Any ideas would be gratefully received! Thank you.

Thanks - useful to know. Sorry, realise this was posted in the wrong section!

I think I have sorted this out - it seems to have been a problem with the USB port on my MacBook Pro.

p.s not surprisingly, EasyUploader shows a 'Failed' upload.

I tried uploading software including Acyclotron, etc which didn't seem to work. This resulted in no lights or sound from the unit. I have just tried loading the Atmegatron v2.5 to rectify but still no lights/success. Any help appreciated!

"/Volumes/EasyUploader/EasyUploader.app/Contents/MacOS//avrdude" -c arduino -p m328p -C "/Volumes/EasyUploader/EasyUploader.app/Contents/MacOS/avrdude.conf" -P /dev/cu.usbserial-AL01NT5Y -U flash:w:"/Volumes/HD 2 Music/x Atmegatron/AtmegatronV2-5.hex":i
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00

avrdude done.  Thank you.