Soulsby Synths Forum

Products => Atmegatron => Topic started by: rui-gen on February 06, 2020, 07:28:25 PM

Title: cannot load software on new mac
Post by: rui-gen on February 06, 2020, 07:28:25 PM
I have a limited edition Pete Fowler atmegatron
I got the lead with the machine
I cannot load software onto the machine - I have in the past on an older mac but I have now upgraded my MAC and it will not work
The black wire on the PIN is too the left
The switch is also in correct position
I have installed the correct driver and the newest version on easy uploader
Im pulling my hair out!
My MAC is running MAC OS Catalina 10.15.3
please help!
Title: Re: cannot load software on new mac
Post by: paulsoulsby on April 10, 2020, 01:11:31 PM
Hi - can you post the output of the console. Tick the box in easy uploader.  Try to upload the hex. Then paste the result here.
Title: Re: cannot load software on new mac
Post by: rui-gen on March 11, 2021, 08:12:38 PM
Hi Paul

Sorry for the late reply!

Here is the box:"/private/var/folders/7d/yd1mtszj1kn2g3605wwf8wwm0000gn/T/AppTranslocation/79A6CAF2-21F9-40C2-9C75-29AA7EB3F928/d/EasyUploader.app/Contents/MacOS//avrdude" -c arduino -p m328p -C "/private/var/folders/7d/yd1mtszj1kn2g3605wwf8wwm0000gn/T/AppTranslocation/79A6CAF2-21F9-40C2-9C75-29AA7EB3F928/d/EasyUploader.app/Contents/MacOS/avrdude.conf" -P /dev/cu.usbserial-A906XJIZ -U flash:w:"/Users/simonboyles/Music/Samples/Atmegatron/Strings/StringsV1-3.hex":i
Title: Re: cannot load software on new mac
Post by: paulsoulsby on April 15, 2021, 07:44:54 AM
That's odd, it's sending the command to upload, but then not doing anything at all.  No errors or any signs of it trying to upload.  I'll locate a machine with Catalina and come back to you (my machine is still stuck on high sierra).