- Welcome to Soulsby Synths Forum.
Recent posts
#71
Atmegatron/Odytron Hardware technical support / Re: Atmegatron: Potentiometer ...
Last post by paulsoulsby - June 29, 2018, 09:09:46 AMHi,
The spec is: 10k, linear, 6mm diameter, D shape, 25mm height.
I think Bourns and Alps both make one.
Possibly worth a bit of contact cleaner first?
The spec is: 10k, linear, 6mm diameter, D shape, 25mm height.
I think Bourns and Alps both make one.
Possibly worth a bit of contact cleaner first?
#72
Atmegatron/Odytron Hardware technical support / Atmegatron: Potentiometer (dis...
Last post by rio - June 27, 2018, 07:31:44 AMHi paul,
Can you tell me which potentiometer is used for the distortion (which is on the far right)?
That Potentiometer is scratching a bit with me. Maybe I like to replace it.
Is it "Logarithmic" or "Linear"? Please, can you tell me the resistance value, the shaft-height in mm, the type (pin count, identification/product/model number)?
thank you.
Greetings,
rio
Can you tell me which potentiometer is used for the distortion (which is on the far right)?
That Potentiometer is scratching a bit with me. Maybe I like to replace it.
Is it "Logarithmic" or "Linear"? Please, can you tell me the resistance value, the shaft-height in mm, the type (pin count, identification/product/model number)?
thank you.
Greetings,
rio
#73
Everything else / Re: Post your songs!
Last post by rio - June 22, 2018, 11:39:26 PMhey ToyKeeper,
after I could hear the songs in peace at home
- here are some thoughts about it:
easy does it draft 1: these are really nice lead sounds and melodies that you created there. The recording sounds a bit overdriven, but maybe it was your intention. Personally, I think it would sound better, if not so distorted - especially in the bass area, there is a lot lost by that. You can certainly rasp at one point or another, otherwise thats quite passable... I would cut it a bit more. The combination of the bass melody with the lead sounds is really cool ...
digitest 1: is the arpeggio sound by atmegatron? it sounds nice melodic ... although the part is quite strong. the other sounds in the background are not bad either;)
...do not misunderstand me - I really like both tunes;)
after I could hear the songs in peace at home
- here are some thoughts about it:easy does it draft 1: these are really nice lead sounds and melodies that you created there. The recording sounds a bit overdriven, but maybe it was your intention. Personally, I think it would sound better, if not so distorted - especially in the bass area, there is a lot lost by that. You can certainly rasp at one point or another, otherwise thats quite passable... I would cut it a bit more. The combination of the bass melody with the lead sounds is really cool ...
digitest 1: is the arpeggio sound by atmegatron? it sounds nice melodic ... although the part is quite strong. the other sounds in the background are not bad either;)
...do not misunderstand me - I really like both tunes;)
#74
Everything else / Re: Post your songs!
Last post by rio - June 20, 2018, 08:22:41 AMQuote
Well, as it turns out, dragging my feet was an understatement. I still haven't gotten back to it, months later.
Quote
I've spent most of my music time lately looking for a better way to do midi sequencing, so I can capture ideas while exploring and then clean them up for a more organized render later. And I just got a Digitakt to help with this, and to serve as a drum machine. Hopefully it'll help me stop dragging my feet and actually get some songs done.
yeah ..for sure, that's important.
Quote
I really like the combination of Atmegatron and Microbrute, retro digital plus retro analog in a single dirty sound.
post a picture !
I really have to listen here under bad conditions at work, but what I have listen so far sounds fantastic (both songs)!
I have to listen to this at home
Greetings, rio
#75
Everything else / Re: Post your songs!
Last post by ToyKeeper - June 20, 2018, 03:41:31 AMWell, as it turns out, dragging my feet was an understatement. I still haven't gotten back to it, months later.
So, um, here's that first draft I made, complete with badly improvised melodies I played with no particular plan in mind. And sort of a club remix at the end:
http://toykeeper.net/tmp/music/Easy_Does_It-draft1.mp3
I've spent most of my music time lately looking for a better way to do midi sequencing, so I can capture ideas while exploring and then clean them up for a more organized render later. And I just got a Digitakt to help with this, and to serve as a drum machine. Hopefully it'll help me stop dragging my feet and actually get some songs done.
So far though, all I've done is hook it up, debug a few things, and record a quick sound test. Here's that sound test, a simple repeating pattern while I mess with the knobs on my Atmegabrute to make something like a sonic rainbow:
http://toykeeper.net/tmp/music/digitest-1.mp3
I really like the combination of Atmegatron and Microbrute, retro digital plus retro analog in a single dirty sound.
So, um, here's that first draft I made, complete with badly improvised melodies I played with no particular plan in mind. And sort of a club remix at the end:
http://toykeeper.net/tmp/music/Easy_Does_It-draft1.mp3
I've spent most of my music time lately looking for a better way to do midi sequencing, so I can capture ideas while exploring and then clean them up for a more organized render later. And I just got a Digitakt to help with this, and to serve as a drum machine. Hopefully it'll help me stop dragging my feet and actually get some songs done.
So far though, all I've done is hook it up, debug a few things, and record a quick sound test. Here's that sound test, a simple repeating pattern while I mess with the knobs on my Atmegabrute to make something like a sonic rainbow:
http://toykeeper.net/tmp/music/digitest-1.mp3
I really like the combination of Atmegatron and Microbrute, retro digital plus retro analog in a single dirty sound.
#76
Everything else / Re: EasyUpLoader
Last post by paulsoulsby - June 11, 2018, 11:44:09 AMYou're using an Atmega328P ? It should work fine for that, but not for any other Atmega. This is because I have hard-coded the Atmega328P into the AVRDUDE command in the software.
Also, you should have a cap (think 0.1uF) in series with the reset line in your schematic. Do you have this?
Also, you should have a cap (think 0.1uF) in series with the reset line in your schematic. Do you have this?
#77
Everything else / EasyUpLoader
Last post by arpeggio - June 09, 2018, 03:08:31 PM Hello, i got the tip for the EasyUpLoader from Jean-luc Delariere, i have some boards from him and i will maybe buy an Atmegatron or something, i spotted these great synths already, but you know how it goes, anyway,
i much like the tweakability of it, i do a lot with Arduino so i will look into it again.
My question is about the easyuploader, because i am making, coding and selling on Tindie my Ipeggio, it's on sound/MIDI tab, Newest and then you find Ipeggio.
And if i want to update firmware for the users i can send the firmware and with the Easyuploader the user can upload the firmware to the Arduino Mega and
Then he/she does not see the code, and only use the Hex-file. Like you probably do and Jean-luc does.
So i tryed using the easyuploader, works great for an Uno, but for the Mega it says avrdude getsync() not in sync. On Windows 7.
I had all the settings good i guess, cause it is connecting and trying to upload, the board resets and then gets two or three transmitted messages, i see the RX led lit up,
and then no good TX responce from the Mega, Avrdude says not in sync, i tryed lowering the bautrate, no result..
I also tryed XLoader and the same no result, Does anyone have a qlue to get me going with this one, any help is welcome.
Thanks in advance, Dian From the Netherlands
i much like the tweakability of it, i do a lot with Arduino so i will look into it again.
My question is about the easyuploader, because i am making, coding and selling on Tindie my Ipeggio, it's on sound/MIDI tab, Newest and then you find Ipeggio.
And if i want to update firmware for the users i can send the firmware and with the Easyuploader the user can upload the firmware to the Arduino Mega and
Then he/she does not see the code, and only use the Hex-file. Like you probably do and Jean-luc does.
So i tryed using the easyuploader, works great for an Uno, but for the Mega it says avrdude getsync() not in sync. On Windows 7.
I had all the settings good i guess, cause it is connecting and trying to upload, the board resets and then gets two or three transmitted messages, i see the RX led lit up,
and then no good TX responce from the Mega, Avrdude says not in sync, i tryed lowering the bautrate, no result..
I also tryed XLoader and the same no result, Does anyone have a qlue to get me going with this one, any help is welcome.
Thanks in advance, Dian From the Netherlands
#78
Atmegatron / Chiptune patches for Boutiques
Last post by joejonsme - May 21, 2018, 08:42:11 AMHello,
Just wondering a) If anyone has created any chiptune (8-bit game sounds) patches with either of the 3 boutiques or b) could point me at the best boutique model for the job and the best base set of params. The sort of sounds I'm after, you'll find in this great little.
Please help.
I didn't find the right solution from the Internet.
References:-
http://forums.rolandclan.com/viewtopic.php?f=59&t=51506
Explainer video production agency
Thanks
Just wondering a) If anyone has created any chiptune (8-bit game sounds) patches with either of the 3 boutiques or b) could point me at the best boutique model for the job and the best base set of params. The sort of sounds I'm after, you'll find in this great little.
Please help.
I didn't find the right solution from the Internet.
References:-
http://forums.rolandclan.com/viewtopic.php?f=59&t=51506
Explainer video production agency
Thanks
#79
Oscitron Hardware Technical Support / Re: Uni-Five Installation
Last post by sfish - May 08, 2018, 12:31:09 AMtyvm!
#80
Oscitron Hardware Technical Support / Re: Uni-Five Installation
Last post by paulsoulsby - May 07, 2018, 07:15:38 PMThose are up on the downloads page now.